Manufacturer Reiter
Stock number 0815
Machine model Reiter Abcoilanlage mit 6 Haspeln automatische Längs und Querteilanlage Fabr Reiter Typen ABH 125-6F, CS 6,ERSA 125-1,5, QC 125-1,5
Year of construction 2006
Time of delivery
Price € 288.000,00
Special price € 145.000,00
Reiter Abcoilanlage mit 6 Haspeln automatische Längs und Querteilanlage Fabr Reiter Typen ABH 125-6F, CS 6,ERSA 125-1,5, QC 125-1,5

Click to enlarge image

Print view
Add to watchlist
Print view

Technical data

Description

Decoiler REITER

Year of construction 2006

Original price of the entire system EURO 288.200, -
SPEZIALL PRICE EURO 145.000,--


Coil width 1,250 mm


Coil outside diameter 1,300 mm


Coil inside diameter 508 mm


Cutting length 7,000 mm


Sheet thickness of 0.4 is 1.5 mm

Maximum coil weight 2000 kg


Material steel Rm max. 400 N / mm²

CU, Al, stainless steel


Uncoiler for metal bands rider

6 pcs. CNC controlled

Type ABH 125-6f

Max. Width of the coil 1270 mm

Max. Weight of the coil 3 x 2000 kg

3 x 1000 kg

The reels are placed in the arrangement 2 x 3


Clamping range 370 x 520 mm

Max. Coil outer diameter 1,200 mm


Drive of the geared motor with soft start, infinitely variable

Speed by means of frequency converter.

Electric power per 1.1 kW for the reels with the capacity of 2 to.

                                         0.75 kW each for the reels with the load capacity of 1 to.

Manuelse spreading the tension segments


The reel stand is made of steel welded construction, the main shaft

consists of high quality tempered steel and is stored in ball bearings.

Important One-sided storage of the reel shaft, therefore easy loading.


Coil selector for sheet metal strips Fabr Reiter Model CS 6

Max. Sheet metal work 1270 mm

Max. Sheet thickness 1.5 mm

Number of coils 6


The coil selector is vertically movable, so that the required sheet horizontally in the subsequent

Machine is inserted. This ensures that the sheet is transported without distortion and at right angles.

As soon as the sheet metal is held in the feed rollers of the following system, the drive decouples and the

Further transport is carried out by the feed leveler. Roller conveyors lead the sheet from the reels into the coil selector.

The required coil is selected by the control, the change between the individual sheets can be carried out by a person in the shortest possible time.

 
 
 
 
 
 
 
Combined feeder, straightening, longitudinal and cross cutting system 
Fabr. Rider Model ERSA 125-1.5
For sheet metal strips and with electrical length measurement
Max. Sheet width 1270 mm
min sheet width in the inlet 300 mm
Max. Sheet thickness 1.5 mm sheet steel Rm = 400N / mm²
at 3 glechzeitigen longitudinal sections
Electric drive by geared motor and chain or gear drive
Freely programmable control Siemens S / and frequency converter (machine starts smoothly
and does not jerk, thus increased accuracy when cutting to + - 0.5 mm / m
Lengthening and 15 programs (length and quantities). The software is designed that the user only
still have to enter the plant-specific values. As a result, a few steps have to be taken in the condition
features:
Automatic zero cut
Control of knife position
Speed infinitely adjustable
Status message, error message in plain text
Jerk-free acceleration and deceleration through optimized ramps
Program and parameter data are protected against power failure.
Full graphic operator terminal operating panel OP 170 with 5.7 monitor.
With 8 pairs of continuously adjustable slitting knives. Minimum strip width 80 mm
Digital knife adjustment device of strip shear.
The two blade shafts are surface hardened
Program-controlled lifting of the upper knife shaft for more automatic waste optimization
The upper of the two feed rollers is pneumatically pressed.
The straightening unit has seven straightening rollers, the straightening rollers automatically adjust to the specified values.
At standstill of the sheet feed, the rollers lift, so that imprints of the rollers are avoided on the plate.
The cutting-off scissors are designed as guillotine-type and have a hold-down with a protective insert, so that sensitive sheets are not damaged
can be. The drive is electromechanical. Electric drive power: 2, 2 kW
Pneumatically operated table between feed unit and dividing shear.
Device for applying a protective film, weight of the film roll max. 200 kg
Program-controlled knife adjustment quick Changs
Rider Mod. QC 125-1.5
Max. Sheet metal work 1270 mm
Max. Sheet thickness 1.5 mm
Material steel Rm max. 400 N / mm²
CU, Al, stainless steel


Note

Prices ex works, excl. 20% VAT.

Terms and conditions apply toGeneral Terms of Deliveryof the Austrian Association for the Machine-Building and Steel Construction Industry of 01 January 2002.We only sell under proprietary rights. The goods stay in our unrestricted property until completly payed. 

Prices and mistakes are subject to change.